page_banner

Newsletter

NOBILCAM Flexible Disc – New generation materials for non-metal partials

Would you like to try another type framework for your partial dentures? NOBILCAM Flexible Disc would help you realize it. The Flexible Disc is made from nylon resin, which has low risk to crack or break up. The unbreakable materials with excellent flexibility make it suitable to undertake the function of framework.

89e14fba383174fef391557305d9e47

Some Advantages of NOBILCAM Flexible Dentures

微信截图_20230526135632

1. Practically unbreakable and crack-resistant

NOBILCAM Flexible Disc has better performance on strength compared to other nylon materials. The flexible frameworks for partial dentures are generally considered to be strong and resistant to fracture or crack.
*A bar-shaped sample with a length of 20mm, width of 2 mm, and thickness of 2 mm can withstand a weight of 5kg without irreversible deformation.
微信截图_20230524001746
7db203bf-84de-09bc-1017-4e7c31bd809d

2. Exceptional memory to hold its form

NOBILCAM Flexible Discs are not easily deformed. Therefore, the framework of partial denture can maintain good elasticity and accuracy, ensuring outstanding tooth retention ability after long-term use.

3. Stain-resistant

According to the test, nylon resin has great ability to resist stain. The sample was soaked in coffee, black tea and red wine for a period of time and no significant discoloration was observed. (After soaking in coffee, black tea and red wine at 60 ℃ for 100 hours, almost no color change was detected.)

 

*From left to right: Red wine, Black tea, Coffee

ce494792-da3d-c911-84be-0e26caceb1fe

Workflow of Fabricating Flexible Partial Denture

Step 1: Modeling and scanning

1d1c846d-7b9d-e5f3-ab1a-bce3f727725d

Make the plaster model according to the impressions and scan the modified model.

Step 2: Design

36cc559d-b76f-b04b-ea9f-f82fb7c0b432

Basically same as metal framework.

Step 3:Milling

f4c87515-2b8b-6cb0-a780-c10ec0d6d17e

Preferred milling method is wet milling. When using dry milling method, the heat produced during milling can cause the material to build up around the milling bur. Therefore, please check it regularly. If it happens, stop the milling, clean the bur and resume.

Step 4: Add teeth to the NOBILCAM Flexible Framework

35722a13-a37b-1a06-d842-0bde9da2de26

• Arrange and wax the denture teeth on the framework. • Process the partial denture by investing, packing and curing the acrylic resin. • Polish the denture to ensure a smooth and comfortable fit.


Post time: May-26-2023
×
×
×
×
Write your message here and send it to us